How to refill ink Flash rubber stamp
1. Turn the rubber stamp over and open the lid.
2.Apply ink on the embossed part, the ink will gradually go down (the area convex from the rubber).
Do about 4-5 times
3. Trial the work pump Add additional cleaning rubber stamps as long as the ink has gone out.

How to refill ink Flip built-in ink rubber stamp
1. Press the handle of the rubber stamp slightly. And press the lock button on both sides
2. Make your hand push the tray to take out the ink.
3. Put 4-5 drops of ink on the ink tray all over the tray.
4. Wait for the ink to dry for about 3 minutes, then put the ink tray in place.